Disposable Respirator Refil 750 FFP3 without valve
Description
Respirator REFIL 750 FFP3 NR
Particulate filtering half mask
DESCRIPTION
REFIL 750 respirators have been tested and approved according to EN 149:2001+A1:2009, filtration class FFP3.
REFIL 750 respirators protect the user against inhalation of dust particles and liquid aerosols up to
concentrations of 50 times the NPK/PEL exceedance.
Clamping high elastic bands ensure a quick and correct fit of the half mask on the face.
The filter material used with low breathing resistance and constant high filtration efficiency provides high
standard of wear.
The moldable nose bridge also contributes to the comfort and good seal of the half mask on the face.
MATERIAL SPECIFICATION
- Filter and cover layers polypropylene/polyacrylonitrile
- Clamping tape natural rubber
- Carrier clamp/bridge steel wire in plastic polypropylene
- The maximum weight of the half mask is 30 g.
STANDARDS AND CERTIFICATIONS
REFIL 750 respirators comply with the requirements of EN 149:2001+A1:2009/ČSN EN 149:2002+A1:2009 for filtering
class FFP3 against solid and liquid particles.
This respirator is rated according to the filtration efficiency of the respirator, total filtration efficiency = total
indoor penetration, breathing resistance, fouling resistance and flammability.
Respirator designation: the REFIL 750 FFP3 NR
NR = for single use (one shift only)
This product meets the basic health and safety requirements of Government Regulation No.21/2003 Coll,
which complies with European Directive 89/686/EEC and bears the CE marking.
The EC type-examination certification was issued by the Research Institute of Occupational Safety, v.v.i, Jerusalemémská 9, Prague 1 (Notified Person 1024, Authorized Person 235).
TRANSPORT AND STORAGE
Store the product in a clean and dry environment, at a temperature of -5°C to +40°C, maximum relative humidity
80%. Store and transport the product in its original packaging.
Before use, check the product to ensure that it is complete, undamaged and that the expiry date has not passed, which
is marked on the smallest commercial package, on the cardboard. Read the instructions for use.
Avoid contamination of the product during transport and storage.
LIKVIDATION
Dispose of used/contaminated products as hazardous waste in accordance with local regulations
CLEANING
Respirators are not cleaned, they are designed for single use in the scope of one shift.
Filtration class | FFP3 |
Read more | Packed in pieces, Without exhaust valve |
Construction | Foldable |
Be the first who will post an article to this item!