Disposable Respirator Refil 751 FFP3 NR with valve

Respirator REFIL 751 FFP3 NR

Particulate filtering half mask

DESCRIPTION

REFIL 751 respirators have been tested and approved according to EN 149:2001+A1:2009, filtration class FFP3. REFIL 751 respirators protect the user against inhalation of dust particles and liquid aerosols up to a concentration of 50 times the NPK/PEL.

Clamping high elastic bands ensure a quick and correct fit of the half mask on the face.

The filter material used with low breathing resistance and constant high filtration efficiency provides a high standard of wear.

An exhaust valve reduces the temperature under the half mask.

The moldable nose bridge also contributes to the comfort and good seal of the half mask on the face.

MATERIAL SPECIFICATION

• Filter and cover layers polypropylene/polyacrylonitrile
• Clamping tape natural rubber
• Carrier clamp/bridge steel wire in plastic polypropylene
• Valve polypropylene
• Valve diaphragm natural rubber
• The maximum weight of the half mask is 30 g.

STANDARDS AND CERTIFICATIONS

The REFIL 751 respirators comply with the requirements of EN 149:2001+A1:2009/ČSN EN 149:2002+A1:2009 for filtration class FFP3 against solid and liquid particles.

This respirator is evaluated according to the filtration efficiency of the respirator, total filtration efficiency =total indoor penetration, breathing resistance, fouling resistance and flammability.

Respirator designation: the REFIL 751 FFP3 NR

NR = for single use (one shift only)

This product complies with the basic health and safety requirements of Government Regulation No.21/2003 Coll., which is in accordance with European Directive 89/686/EEC and bears the CE marking.

EC type examination certification was issued by the Research Institute of Occupational Safety, v.v.i, Jerusalemémská 9, Praha 1 (Notified person 1024, Authorized person 235).

TRANSPORT AND STORAGE

Store the product in a clean and dry environment, at a temperature of -5°C to +40°C, maximum relative humidity
80%. Store and transport the product in its original packaging.

Before use, check the product to ensure that it is complete, undamaged and that the expiry date has not passed, which
is marked on the smallest commercial package, on the cardboard. Read the instructions for use.

Avoid contamination of the product during transport and storage.

LIKVIDATION

Dispose of used/contaminated products as hazardous waste in accordance with local regulations.