Filter combined 3M Scott Profile PRO2 A1B1E1-P3 (pair)
Description
Combined filter Profile PRO A1B1E1-P3 (pair)
Description
The Pro2 series filters come in pairs for face masks and half masks with two Scott filters. They offer a wide selection of types, covering an extensive range of hazardous substances. They are produced using the latest technology and the highest quality media. Each filter features a unique cover with a rear-facing grille at the inlet.
Using the A1B1E1K1-P3 filter
- P3 Particles (+ radioactive substances, bacteria, viruses and enzymes) The "R" designation means that the particle filters and particle filters of the combination filters are suitable for reuse against aerosols (several working shifts).
- A1 Organic gases and vapours, e.g. from solvents, boiling above 65 ºC
- B1 Inorganic gases and vapours, e.g. chlorine, hydrogen sulphide, hydrogen cyanide
- E1 Acid gases and vapours, e.g. sulphur dioxide and chlorine dioxide
Compatibility
Designed for Scott Profile2, Scott Profile60 and Scott Promask Twin.
Properties
This solution protects the filter material from sparks, chemical contamination and staining, thus significantly extending the filter life. The Pro2 series particulate filters and combination filters do not use electrostatic methods to trap particles, but only microfibre filter paper.
The Pro2 series filters are fully approved to the latest European standards, are designed for reuse (marked "R") and carry the CE mark. They are fixed with a bayonet connection.
Standards
Approved to EN 143 and EN 14387
Related products
-
Code: 32070
-
Code: 12890
-
Code: 32080
-
Code: PREFILSCOTTPROFILE
Be the first who will post an article to this item!