Hand detector of flammable gases (natural gas, propane butane,...) Honeywell Ezsense
Description
Handheld flammable gas detector Honeywell Ezsense
eZsense is a small, lightweight and affordable flammable gas leak detector. It is equipped with a droplet catalytic sensor that does not require calibration. It can be used to detect gas leaks from, for example, pipes, fittings, valves, gas tanks and household appliances. Detects natural gas, methane, propane, butane, LPG and liquefied natural gas.
Usage:
It allows to determine the extent and location of leakage of flammable gases: natural gas, methane (CH4), propane, butane, LPG (liquefied petroleum gas, formerly marked propane-butane), LNG (liquefied natural gas). It is equipped with optical and acoustic signalling.
Main features
- It is lightweight, portable and affordable.
- Easy to use: bring the detector close to the expected leak location and if a flammable gas is detected, an audible signal will sound and the yellow or red LED will light up depending on the concentration.
- Simple operational verification.
Technical parameters
- Function: flammable gas leak detection
- Gases detected: natural gas, methane, propane, butane, LPG , LNG
- Sensor: droplet catalyst sensor
- Range: 0 - 10 000 ppm (20% of lower explosive limit)*
- Calibration: not performed
- Sound signal: yes
- Optical signalling: three-level
- Ambient temperature: -10 to +50 °C
- Maximum relative humidity: 95%
- Compliance: EMC according to Directive 89/336/EEC
Optical indication
- Green LED: on, concentration less than 500 ppm*
- Yellow LED: concentration above 500 ppm*
- Red LED: concentration above 2 000 ppm*
Dimensions
- Length: 188 mm
- Diameter: 30 mm
- Weight: 110 g
Power
- Power supply: 2 x AA size alkaline pencil cell
- Voltage: 2 x 1.5 V
- Power: 600 mW
- Continuous operation time when using alkaline cells: approx. 4 hours
Related products
Be the first who will post an article to this item!
Add a comment